The National Association of Automobile Clubs of Canada
L’Association nationale des clubs automobiles du Canada

Judging update 2017

NAACC  Judging Background and Helpful Hints

Part 1 by John Carlson, Chief Judge

 

In 1984 the NAACC initiated a set of judging guidelines that were used to judge the Expo 86 Vintage International Antique Auto Show held in Vancouver BC. July 6-10th 1986. These guidelines were then expanded and modified in 1989 and were recommended to all car clubs across Canada. In 1995 the (VCCC) Vintage Car Club of Canada  began to use these guidelines and adopted the philosophy that vehicles that won their class should not be judged in the same class again. This would give other new or old restorations a chance to compete against a score sheet for top awards. The guidelines emphasized that the vehicles were competing against a score sheet and NOT each other. Twenty one years later the VCCC is still using the same format.  The judging guidelines are broken into areas that have ‘specific’ classes. Only cars that conform to a specific class (see roster) are judged together in that class.  All vehicles are judged using a 1000 point deduction system. Every single vehicle in a ‘specific’ class that scores 900 points or more is awarded a first place and receives an award.

The highest point vehicle in the Class that scores 940 points or more is also awarded a Best of Class Trophy, and is moved into a Senior Class.  This gives those vehicles that did not win Best of Class a chance to compete the following year. Every vehicle that scores 825 to 899 receives a second place award and every vehicle that scores 750 to 824 receives a third place award. All of the Best of Class winners also receive a ‘keeper’ trophy and have their name and their cars information inscribed on a permanent perpetual trophy that is displayed at most future Judging events for all to enjoy. Some of these perpetual trophies date back 50 years for the VCCC.

To have your name inscribed on a perpetual award is a significant achievement. At each judging event there is a dedicated group of judges who not only view the vehicles but they also make recommendations on the back of their score sheets as to how one might improve their vehicle or in some cases correct a safety issue. These score sheets are returned to the vehicle owners upon request.

Having a car judged at an designated judging event is an experience that helps many restorers/owners  to improve their vehicles and receive recognition for a job well done.

 

One of the key components that many owners overlook is the battery. Correct original style working batteries are available. For those that do not want to spend the extra money to have an actual correct working battery there are reproduction battery tops available that simulate the proper look of an original battery top. 1970’s vehicles and older should display a removable vented tar top style battery.  The reproduction simulated tar top is available for less than $50 and it never wears out! If you use a modern battery make sure you purchase a battery with top mounted battery posts and that has the proper original case dimensions and then simply display a simulated top.  This also really cleans up the look of the engine compartment.

 

Judging  Part 2-- How to obtain a great score!

The NAACC  judging format emphasizes that a vehicle be judged on its own merits. It should make absolutely no difference, where, how or who restored or constructed the vehicle. The vehicle must stand entirely alone separate from its owner or restorer. The vehicle must be viewed as an object aside from personalities, cash outlay, or professional vs. amateur restoration.  Hobbyists have tired of the political maneuvering and one-upmanship that sometimes creeps into the judging arena. It seems hardly fair that a car is a second place vehicle because it scores a half point less than its competition, especially when its competition has received a perfect score. Obviously, there will be some controversy at this point, but please examine the category point allocations and consider this approach. NAACC winners have a 100 point range to achieve a first place. Participants compete against the score sheet.  Please refer to the NAACC  Judging Guidelines for clarification of the point system and the various Classes.

 

Helpful Hints & Clarification: Add-on fuel pumps (electrical or mechanical) which replace or supplement original type pumps or fuel supply devices are considered non authentic, but will receive no deduction provided they have been neatly installed out of plain view.

 

 How to achieve good scores. Car owners/restorers have choices as to whether they research a proper fastener or spend more time polishing.  An extra shiny fender receives no more or less points for what it is. Non authentic style nuts and bolts do receive dreaded point deductions. A quick fix, if a bolt is required to be Cadmium plated one easy inexpensive way to achieve the proper look or finish is select a stainless bolt of the proper size, grind off the grade markings on the bolt head, then polish the bolt head smooth removing all grinding marks. The last step is to glass bead the entire bolt giving it Cadmium plated  looking flat finish. The bolt resembles the original, will never rust and also has the proper strength required.  Window Glass edges (in particular Model A Fords) that are required to be black maybe easily blackened by using a waterproof permanent ‘Sharpie’ laundry marker drawn along the side of the pen felt. This makes the glass edge black and there is no point deduction.  NAACC rules require safety glass be used in all windshields.

 

Part  3  Tires



Selecting the correct type of tires for your restoration is always a serious consideration.

Judges look for the correct type and size of tires in true Concours judging. Many owners that show and drive their cars have two sets of tires and wheels. One set are radial tires. If the car originally came with bias ply tires the owner is faced with decision; should I spend the extra money and have two sets of tires or will one set do. The number of miles the car is driven will often determine your choice. Radial tires are more forgiving and certainly provide a better ride. They also run cooler and do not get flat spots from sitting. Bias ply tires do flat spot from long time sitting. From a judging perspective always check the maximum deduction for displaying an incorrect tire.

 

The VCCC tire judging point deductions have been lowered for the use of radial tires providing they conform in size to the original components. The reasoning is that most VCCC members drive their cars longer distances to May Tours and therefore need to be safe and have a comfortable ride.  There is only a two point deduction for each non authentic type of tire that is displayed including the spare. The VCCC judging format is out of 1000 points. In my opinion, losing ten points is nothing in the overall scheme of things. However, if you were to have your Corvette judged in NCRS judging the wrong tires would be a serious deduction.  Always find out what the deductions are in the events you are participating in.

 

The appearance of the tire is very important. Clean and apply a flat tire UV finish to the rubber.  The proper valve stems and valve caps are very important.  If you were displaying a pre 1935 Ford you would need all metal valve stems and stem caps. All Model A Fords used metal valve stems and metal stem covers. In 1932 to 1934 the valve stems did not have a fully enclosed removable metal cover but all valve stems and caps were metal. Do your homework to see what your valve stems and stem caps were when they came from the factory. Usually the first things judges look at are wheels, tires, valve stems and valve stem caps. Costly deductions are easily avoided.

 

Setting up the tire when it is being mounted is also important and makes your vehicle stand out. This is especially important if you have side mounted or rear mounted spare tires.

 

Step one is to have the tire installer center the lettering of the tire directly over the value stem. By doing this you can locate the hubcap so that the tire lettering, valve stem and hubcap are all on the same viewing plain.

 

Side mounted tires should be installed on the vehicle so that the valve stem is on the top facing down. This prevents the wheel rim from accepting water and the valve stem will not rust out. As an example, all Model A and 1932 to 1934 Fords with mounted spares are required to have their valve stems facing down. Also, if you had a flat tire your spare tire change would then conform to the information above. If you own a 1950’s through 1970’s vehicle I would still recommend mounting your tire lettering above the valve stem and mount the balancing weights on the back side of the rim if possible. Make sure your valve stem caps are era correct. Yes, I am aware that most tires do have a balancing spot.  There are many manufactures that can supply the correct style and type of tires for your car. Coker Tire https://www.cokertire.com  makes era correct tires but did you know that Diamond Back Tire  https://www.dbtires.com  will take the tire brand of your choice and insert any width of    whitewall you want. Whitewall width and correct tire size is important. Tip: If you have a wheel size more than one inch over the original size ICBC deems that as a non authentic part if you have ‘stock’ collector plates.

 

 

 

 

 

Judging

 

Judging is an important part of showing cars and Judging standards are upheld by the NAACC

 

Revised October 2015

National Judging & Safety Guidelines

 

Download GUIDELINES>>

 

Judging- Making It Right--Part 3 by John Carlson, Chief Judge

 

Selecting the correct type of tires for your restoration is always a serious consideration.

Judges look for the correct type and size of tires in true Concours judging. Many owners that show and drive their cars have two sets of tires and wheels. One set are radial tires.
Download pdf>>

 

©2015 National Association of Automobile Clubs of Canada

NAACC Corporate Secretary  529 Princess Street, Estavan Sask. S4A  2E8 Secretary@naacc.ca

NAACC Headquarters Office   3512 Marine, Belcarra BC V3H 4R8 President@naacc.ca